vielen Dank
Flightsimlabs - A319/A320-X/A321
-
-
Alles anzeigen
Konnte leider den A319 nicht testen gestern. Mein P3D startet zwar, aber er bleibt beim Startbild hängen. Habe nun heraus gefunden, dass wohl ein Problen mit der scenery.cfg gibt. "scenery.cfg structur error. Konnte das mit dem Scenery Config Editor heraus finden. Aber habe nix finden können in der cfg.
Wie kann man das structur Problem lösen ? Wäre für Vorschläge dankbar.
Hmmm, ich kann mich erinnern, das der SCE auch Fehler zeigt, wenn keine da sind.
Lösche mal den default Flug im P3D. Das war es damals bei mir.Local Disk (C:) ► Users ► You ► AppData ►Local ► Lockheed Martin ► Prepar3D v4
Prepar3D_Default.fxml und Prepar3D_Default.wx
PS:
Ansonnten auch diese Dateien löschen:
Prepar3D.cfg, UISettings.xml und VehicleFavorites.xm
Natürlich in: Local Disk (C:) ► Users ► You ► AppData ► Roaming ► Lockheed Martin ► Prepar3D v4hat leider nix gebracht. Habe jetzt den Bus deinstalliert und P3D auch neu installiert. Nun startet er wieder. Mit der alten scenery.cfg streikt er. Somit muss ich mir heute Abend die Arbeit machen und alle Scenerien, die er nicht schon nach dem neuen System (addon Liste) erkannt hat, Neu aktivieren. Werde wohl auch aufs neue System umstellen, dann habe ich das nächste mal weniger Ärger.
-
Der Eintrag in der [Area001] kommt mir sehr komisch vor, der passt nicht. Lösch den mal, weiss aber nicht, ob man dann alles neu durchnummerieren muss, was dann ja fast auf die gleiche Zeitspanne kommt
Grüße
Raoul
-
Der Eintrag in der [Area001] kommt mir sehr komisch vor, der passt nicht. Lösch den mal, weiss aber nicht, ob man dann alles neu durchnummerieren muss, was dann ja fast auf die gleiche Zeitspanne kommt
Grüße
Raoul
ok danke , mal schauen heute Abend, melde mich wieder.
-
Sind A320 und A319 im Funktionsumfang gleich oder gibt es da Unterschiede?
-
- Offizieller Beitrag
Im Moment kann der A319 mehr. Zumindest, was Gimmicks angeht wie Icing, Fueling etc...
Panel-technisch sollten sich beide nichts schenken.
-
Super Teil, bin gerade in Tegel angekommen!
Eine Frage: die Windschutzscheibe kommt mir manchmal etwas milchig vor, so, als ob sie anfangen würde zu beschlagen. ProbeHeat steht auf auto. Gibt's hier noch einen Anti-Fog-Schalter in der Art wie bei der Maddog oder der 717? Beim Blick über den Flügel sieht alles etwas knackiger aus.
mfg Kai
Bei mir auch so. Guck mal hier
https://forums.flightsimlabs.com/index.php?/top…#comment-133370
-
Ja danke, nun weiß ich, es ist ein P3D-Bug. Übrigens hat ein User dort freundlicherweise eine Tauschdatei zur Verfügung gestellt, die diesen Grauschleier doch recht ordentlich eliminiert: https://forums.flightsimlabs.com/index.php?/top…#comment-135064
Allerdings sind dann wohl auch die Effekte verschwunden!
mfg Kai
-
-
Die gräuliche Fenster Farbton ist allerdings von FSLabs so gewollt und wurde mit dem letzten Update etwas abgeschwächt. Dazu plant man den Farbton über in MCDU Menu-Punkt anpassen zu können.
Der angesprochen P3D Bug bezieht sich auf etwas anders.
https://forums.flightsimlabs.com/index.php?/top…&comment=134667
-
Gibt jetzt auch ein Eurowings Paint für den A319, allerdings passen m.M.n. die Proportionen des Schriftzugs nicht. Dazu ist die D-ABGS nicht mehr bei EW, sondern bei der Ungarischen Luftwaffe.
https://forums.flightsimlabs.com/index.php?/fil…9-112-d-abgs-v/
-
Wie bekomme ich denn ne Satcom Antenne zugeschaltet?
-
Wie bekomme ich denn ne Satcom Antenne zugeschaltet?
Noch gar nicht. Das Options Paket ist noch in Arbeit.
-
Oh ok, danke.
-
Doch geht flori-wan kenobi, ab dem 12. Juli bei Aerosoft
-
-
Doch geht flori-wan kenobi, ab dem 12. Juli bei Aerosoft
Alles anzeigenPlease note this list is updated all the time. (last update July 9th)
We strongly recommend you read this before buying!
MODELING / TEXTURING / ANIMATIONS
- Some One of the liveries are not as they are used at this moment. This does not affect use in any way but still something we like to solve as soon as possible. Expected before SP1
- We got partially 2D panels at this moment but not complete (this is linked to the pending PFD update). It's not fully decided when we will fully implement this.
- Gear door sync inop at this moment, will be moved to SP1.
ADD-INS / FEATURES
- We decided to add RAAS after the initial release to avoid possible issues with that affecting the first experience with the new busses. Should be automatically inserted by the Updater a few days after release.
- We found a late issue with the Company Route editor that is being looked at.
- We have a known issue with the viewbar that popped up with P3d V4.3. We do not know what causes this, but are investigating, Should be an easy fix (when we know what causes it)
- Connected Flight Deck can only be activated when the aircraft is fully stable in variables (the system status that needs to be send to the other systems). This is NOT yet the case so CFD is expected to arrive with SP1.
- The RAAS PRO dialog mentions CRJ and not A318/A319, we are awaiting a new version.
SYSTEMS
- We are preparing a complete new version of the PFD that should show more detailed and be faster. Expected with SP1. This should not affect use.
- Independent Navigation Display (ND) for FO with its own mode, range and EFIS control knobs. It will allow complete separate settings between FO and CPT (currently a 1:1 copy of CAP ND). Planned for SP1.
- Status page: Handling of status messages (STS, CLR, RCL) will be improved (more messages, correct handling)
- T/O warning: When pressing the T/O config button all wrong configurations should show up on the E/WD and not only the first one. Should be solved soon.
- Fuel temp calculation needs to take into account the temp of fuel which is already filled in the tanks during refueling.
- CLOCK-Gauge: implement at least two dim states to have it the same behavior as other displays, some small pos corrections etc.
- We want to add some more thing that use the onboard printer, like a automatic printout at hard landings etc. SP1 or SP2.
AUTOFLIGHT / AP/ FLIGHT
This is the area we feel you might see most problems and it has our full attention at this moment. Do keep in mind that there are many occasion where a real aircraft has issues in this field. Pilots then disable the AP and fly the aircraft!
- We like to tweak the reverse thrust but did not find the time. SP1 or SP2.
- Because of late date issues we removed step climbs at this moment. They should arrive before SP1
- Holdings are an open issue at this moment, we attempt to fix this before release. We swear they worked a few days ago.
- Bank angle limits, FD too aggressive in managed mode, we tried to fix this but this caused issues in other parts and we have to revisit this.
- Descent path not perfect, especially when speed limitations are present.
- Selected FPA/VS misses altitudes in some conditions.
- In RWY mode after TO it still follows NAV.
- EXP climb needs tweaking.
- NPA's are missing intercept markers in some conditions.
- We think we got some issues in Offsets that are being investigated.
- RadialIn works but at the last moment we got some more information about this that could be added.
- DME Arcs are not fully stable.
Sounds
- Some fine tuning required as some sounds partly can be at incorrect volume level and/or not triggered in correct timing/condition. As this is a lot of time consuming trial and error we decided to move this to after release (but before SP1 of course).
INSTALLER
- We have a problem identifying the correct screen dimensions so we are unable to install the correct panel files. Should be solved soon. See here for a fix: http://forum.aerosoft.com/index.php?/top…43-panel-files/
ERROR LOG
- There are some errors in the content log file (when you activate that). Two of those are caused by TrueGlass and are because the fact the sim does not understand the bitmap format. Other issues are 'standard' issues caused by XML code that are at this moment unavoidable. You can safely ignore all these issues, they do not affect use in any way.
Manuals
- Due to some late minute changes on the Checklist system the checklists as described in Vol 6 of the manuals (the Step-by-Step) does not fully the way they actually happen in the aircraft. Should not matter much, just follow the one in the aircraft. The document will be updated.
Nö… schlechter Deal nur für nen SatCom
-
Doch geht flori-wan kenobi, ab dem 12. Juli bei Aerosoft
sicher ?
Lies mal was Alles nicht geht beim Kokschen Profibus .
"Please note this list is updated all the time. (last update July 9th)
We strongly recommend you read this before buying!
MODELING / TEXTURING / ANIMATIONS- Some One of the liveries are not as they are used at this moment. This does not affect use in any way but still something we like to solve as soon as possible. Expected before SP1
- We got partially 2D panels at this moment but not complete (this is linked to the pending PFD update). It's not fully decided when we will fully implement this.
- Gear door sync inop at this moment, will be moved to SP1.
ADD-INS / FEATURES
- We decided to add RAAS after the initial release to avoid possible issues with that affecting the first experience with the new busses. Should be automatically inserted by the Updater a few days after release.
- We found a late issue with the Company Route editor that is being looked at.
- We have a known issue with the viewbar that popped up with P3d V4.3. We do not know what causes this, but are investigating, Should be an easy fix (when we know what causes it)
- Connected Flight Deck can only be activated when the aircraft is fully stable in variables (the system status that needs to be send to the other systems). This is NOT yet the case so CFD is expected to arrive with SP1.
- The RAAS PRO dialog mentions CRJ and not A318/A319, we are awaiting a new version.
SYSTEMS
- We are preparing a complete new version of the PFD that should show more detailed and be faster. Expected with SP1. This should not affect use.
- Independent Navigation Display (ND) for FO with its own mode, range and EFIS control knobs. It will allow complete separate settings between FO and CPT (currently a 1:1 copy of CAP ND). Planned for SP1.
- Status page: Handling of status messages (STS, CLR, RCL) will be improved (more messages, correct handling)
- T/O warning: When pressing the T/O config button all wrong configurations should show up on the E/WD and not only the first one. Should be solved soon.
- Fuel temp calculation needs to take into account the temp of fuel which is already filled in the tanks during refueling.
- CLOCK-Gauge: implement at least two dim states to have it the same behavior as other displays, some small pos corrections etc.
- We want to add some more thing that use the onboard printer, like a automatic printout at hard landings etc. SP1 or SP2.
AUTOFLIGHT / AP/ FLIGHT
This is the area we feel you might see most problems and it has our full attention at this moment. Do keep in mind that there are many occasion where a real aircraft has issues in this field. Pilots then disable the AP and fly the aircraft!- We like to tweak the reverse thrust but did not find the time. SP1 or SP2.
- Because of late date issues we removed step climbs at this moment. They should arrive before SP1
- Holdings are an open issue at this moment, we attempt to fix this before release. We swear they worked a few days ago.
- Bank angle limits, FD too aggressive in managed mode, we tried to fix this but this caused issues in other parts and we have to revisit this.
- Descent path not perfect, especially when speed limitations are present.
- Selected FPA/VS misses altitudes in some conditions.
- In RWY mode after TO it still follows NAV.
- EXP climb needs tweaking.
- NPA's are missing intercept markers in some conditions.
- We think we got some issues in Offsets that are being investigated.
- RadialIn works but at the last moment we got some more information about this that could be added.
- DME Arcs are not fully stable.
Sounds
- Some fine tuning required as some sounds partly can be at incorrect volume level and/or not triggered in correct timing/condition. As this is a lot of time consuming trial and error we decided to move this to after release (but before SP1 of course).
INSTALLER
- We have a problem identifying the correct screen dimensions so we are unable to install the correct panel files. Should be solved soon. See here for a fix: forum.aerosoft.com/index.php?/topic/133243-panel-files/
ERROR LOG
- There are some errors in the content log file (when you activate that). Two of those are caused by TrueGlass and are because the fact the sim does not understand the bitmap format. Other issues are 'standard' issues caused by XML code that are at this moment unavoidable. You can safely ignore all these issues, they do not affect use in any way."
-
Und damit wird der Flieger released? Das meinen die aber nicht ernst oder verstehe ich das falsch?
Zitat- Holdings are an open issue at this moment, we attempt to fix this before release. We swear they worked a few days ago.
"Ich schwöre es hat funktioniert"
Zitat
Do keep in mind that there are many occasion where a real aircraft has issues in this field. Pilots then disable the AP and fly the aircraft! -
Hauptsache der Kaffeebecher ist dabei!
