DA Fokker - aircraft.cfg Eintrag gesucht

    Kann mal bitte irgendwer den Eintrag [weight_and_balance] aus der aircraft.cfg von der F100 und F100SD hier posten. Meine Werte hat Topcat durcheinander gebracht. Jetzt ist mein Schwerpunkt irgndwo vor dem Bugfahrwerk und der lässt sich auch von dort nicht mehr verschieben.

    Gruß Timo

    ____ __o
    ___ `\<¬
    __(_)/ (_)____

    206295.png

    F100

    [weight_and_balance] //OE-LVI
    reference_datum_position= 56.86, 0.0, 0.0 //nose tip STA0 17332 mm front of Index 400/40.0% MAC
    empty_weight_CG_position= -56.61, 0.0, 0.0 //17255mm STA379.9
    empty_weight=57342
    empty_weight_pitch_MOI=1049650
    empty_weight_roll_MOI=509922
    empty_weight_yaw_MOI=1252694
    empty_weight_coupled_MOI=0
    max_gross_weight=98000
    CG_forward_limit=0.07
    CG_aft_limit=0.35
    max_number_of_stations = 13

    station_load.0=370,-8,0,0,Pilots
    station_load.1=165,-13.8,0,0,FA front
    station_load.2=165,-81.2,0,0,FA rear
    station_load.3=1764,-28.5,0,0,C-Hold 1
    station_load.4=1671,-38.8,0,0,C-Hold 2
    station_load.5=1974,-71.2,0,0,C-Hold 3
    station_load.6=1082,-71.2,0,0,C-Hold 4
    station_load.7=1687,-24.3,0,0,Pax OA
    station_load.8=3186,-32.7,0,0,Pax OB
    station_load.9=3748,-46,0,0,Pax OC
    station_load.10=3748,-59.3,0,0,Pax OD
    station_load.11=2249,-69.2,0,0,Pax OE
    station_load.12=1687,-75.9,0,0,Pax OF


    F1ooSD

    [weight_and_balance] //OE-LVI
    reference_datum_position= 56.86, 0.0, 0.0 //nose tip STA0 17332 mm front of Index 400/40.0% MAC
    empty_weight_CG_position= -56.61, 0.0, 0.0 //17255mm STA379.9
    empty_weight=57342
    empty_weight_pitch_MOI=1049650
    empty_weight_roll_MOI=509922
    empty_weight_yaw_MOI=1252694
    empty_weight_coupled_MOI=0
    max_gross_weight=98000
    CG_forward_limit=0.07
    CG_aft_limit=0.35
    max_number_of_stations = 13

    station_load.0=370,-8,0,0,Pilots
    station_load.1=165,-13.8,0,0,FA front
    station_load.2=165,-81.2,0,0,FA rear
    station_load.3=1764,-28.5,0,0,C-Hold 1
    station_load.4=1671,-38.8,0,0,C-Hold 2
    station_load.5=1974,-71.2,0,0,C-Hold 3
    station_load.6=1082,-71.2,0,0,C-Hold 4
    station_load.7=1687,-24.3,0,0,Pax OA
    station_load.8=3186,-32.7,0,0,Pax OB
    station_load.9=3748,-46,0,0,Pax OC
    station_load.10=3748,-59.3,0,0,Pax OD
    station_load.11=2249,-69.2,0,0,Pax OE
    station_load.12=1687,-75.9,0,0,Pax OF


    Hilft das?

    Hat funktioniert. Schwerpunkt ist wieder im Normbereich. Danke nochmal :thumbup:

    Gruß Timo

    ____ __o
    ___ `\<¬
    __(_)/ (_)____

    206295.png