[P3Dv4/5] Leonardo Fly The Mad Dog X

Zitat von officercrockey

Die Liste kannte ich bisher nicht. Der Ignition-Schalter mit der Maus macht mich immer ein bisschen wahnsinnig

Hast du eine Maus mit Rad?

Da kannst du den Ignitionschalter mit dem Rad nach unten schalten (durch Drehen des Rades) und dann bleibt er auch stehen; genauso wie bei der APU, da klappt das auch.

mfg Kai

Zitat von Boeingman

Setz den Parameter mal auf 2!

Hat geklappt, danke!

Zitat von Der Merowinger

Hast du eine Maus mit Rad?

Da kannst du den Ignitionschalter mit dem Rad nach unten schalten (durch Drehen des Rades) und dann bleibt er auch stehen; genauso wie bei der APU, da klappt das auch.

mfg Kai

Ja das war auch ein guter Tipp, danke. Da ich aber den HOTAS habe, ist das jetzt die deutlich charmantere Lösung.

Beta release

	Fly the Maddog X Support & Community Forums
	The new Fly the Maddog X version, that includes the much anticipated EFB, is finally ready for download! 1.7b722 is released free of charge for all 64bit customers (P3D v44.4/v4.5/v5), it's an incremental update that requires build 1.6b571 or 1.6b605 installed in your system. Our TSS unofficial merge is fully compatible with 1.7b722 and you won't have to install it again if you already had it on previous version. As usual, even if we have tested all for about a month, we're deploying this new build as an Open Beta first, to be sure that no problems arise when making new "official" full installers. IMPORTANT: due the many changes involved with this release, the installer resets your Load Manager options and installed aircrafts: be sure to read the included PDF installation guide before upgrading to learn how to export and import all of them again into this new version! The main new feature is the EFB addition and its included apps (more details can be found in the included EFB Manual and EFB Flight Tutorial), but this build includes a bunch of fixes and enhancements to further rise the bar of our simulation; just to name a few: Flight dynamics fine tuning (including new LOC/CAP logic, calibrated thrust reverse power, new custom yaw damper/autorudder logic); A brand new "Realistic mode": more details on the included Quick Guide; New "light" failures; Graphics enhancements, including PBR texturing, a gentle dirt layer on displays and effects fine tuning; A new "always pause at TOD" option, as requested by many; Revision of all 82/83/88 weights and new PFPX profiles (remember to replace your old ones, and check that weights are correctly set in PFPX/Simbrief for your saved airframes, as detailed int the documentation); All this said, the big news is not just the EFB itself, but how we modeled it: just like you would expect from the Leonardo SH team, it's a piece of art. It simulates a real tablet, and it's really easy to use: it has been developed around the concept of "apps", and features some cool tools that will make your pilot's life easier: - finally, a proper Performance module is now capable of calculating all necessary data for all variants and engine options; - a brand new Electronic Aircraft Technical Log will help you managing all maintenance tasks and failures; this isn't just a nice application but a perfect replica of a real EATL that you will need to check and use for reporting malfunctions as you would in a real aircraft, and brings a whole new level of realism to our product; - you will be able to load your OFP directly from the EFB from the Weight and Balance app, without the need of opening the Load Manager before the simulator to import your flight data and set payload/fuel; - for those owning a Navigraph subscription, there's a nice Charts application ready to use. It's all detailed in the included pdf guides, speaking of which are all available inside the document's reader app in the EFB; We think this is the best Fly the Maddog X release to date, and we're sure you will enjoy it. We're going to have our summer holidays starting next week, so you could experience a bit of delay in support. We'll be back in September and yes, we do have plans for a MSFS2020 version . Blue skies and happy summer everyone! >> P3D v4.4/4.5 - 1.7b722 - DOWNLOAD PAGE << ********* >> P3D v5 - 1.7b722 - DOWNLOAD PAGE << 1.7b722 CHANGELOGS 64bit edition - P3D v5 HF2 ********************************************************** 1.6b571 -> 1.7b722 incremental upgrade OPEN BETA >>>>[NEW] *AIRCRAFT SYSTEMS* - new yaw damper/autorudder logic added; - EFB added; - EFB and PMS 2D panels added; - new "realistic mode" added; - new GPU auto-disconnect logic added; - new air unit auto-connect logic, basing on OAT; - additional failures implemented; - new GSX sync logic; *3D MODEL:INTERNAL* - EFB model added; - PBR fine tuning and textures update; *LOAD MANAGER* - new option to enable the EFB added; - new "always pause at TOD" option added; - new "realistic mode" option added; *DOCUMENTS* - EFB manual added; - EFB tutorial added. >>>>[FIXED] *AIRCRAFT SYSTEMS* - decreased manual trim speed; - VOR/LOC/ILS CAP/TRK logic revision; - reverser thrust tuning; - flight dynamics tuning; *EFFECTS* - NAV lights tuning; - internal cockpit shaders from external view tuning; - effects tuning; *MISC* - PFPX profile files updated to reflect latest weights revision; *DOCUMENTS* - Quick Guide updated to include latest changes; - User Manual updated to include latest changes; - OM Vol II ch. 5 updated with RCAM and MOTNE tables; - Normal Checklist revision to include EFB reference; - Procedures Guide revision to include EFB reference; - List of Documents updated; - PFPX profile tables updated with latest weights revision. 64bit edition - P3D v4.4/v4.5 ********************************************************** 1.6b571 -> 1.7b722 incremental upgrade OPEN BETA >>>>[NEW] *AIRCRAFT SYSTEMS* - new yaw damper/autorudder logic added; - EFB added; - EFB and PMS 2D panels added; - new "realistic mode" added; - new GPU auto-disconnect logic added; - new air unit auto-connect logic, basing on OAT; - additional failures implemented; - new GSX sync logic; *3D MODEL:INTERNAL* - EFB model added; - PBR fine tuning and textures update; *LOAD MANAGER* - new option to enable the EFB added; - new "always pause at TOD" option added; - new "realistic mode" option added; *DOCUMENTS* - EFB manual added; - EFB tutorial added. >>>>[FIXED] *AIRCRAFT SYSTEMS* - decreased manual trim speed; - VOR/LOC/ILS CAP/TRK logic revision; - reverser thrust tuning; - flight dynamics tuning; *MISC* - PFPX profile files updated to reflect latest weights revision; *DOCUMENTS* - Quick Guide updated to include latest changes; - User Manual updated to include latest changes; - OM Vol II ch. 5 updated with RCAM and MOTNE tables; - Normal Checklist revision to include EFB reference; - Procedures Guide revision to include EFB reference; - List of Documents updated; - PFPX profile tables updated with latest weights revision.
	Fly the Maddog X Support & Community Forums

Hej hej,

hat schon wer Erfahrungen mit dem 1.7 b750er built?

Bei mir kommt es unter EA wieder zu VRAM CTD's, allerdings nur in der MD. Demnach also noch nicht nutzbar. Ähnliche Erfahrungen / Tipps / Tricks?

Danke RoyalToto

Ja die MD war ja früher schon VRAM süchtig, hatte gehofft nach dem Update hat sich das was gebessert. Wird halt mehr Airbus geflogen.

FYI: Der 1.7b753 final built ist raus. Unter V5.1 gibt es oft noch Probleme mit TrueGlass (BETA) und DXGI Device Hung CTD's. Am besten deaktivieren, dann läuft die MD wie geschnitten Brot in allen Situationen.

flythemaddog support forum

Zitat

Posted yesterday at 12:08 PM

Hello Captains!

We've just uploaded new "official" full installers to SimMarket!

This new version addresses all bugs reported within the Open Beta program, free for all 64bit edition customers (P3D v4.4/v4.5/v5.0/v5.1).

We have also released incremental installers, here in the forums, that can be installed on top of the previous "full" 1.7b725, or on top of the latest open beta versions: P3D v4.4/v4.5 - P3D v5.0/v5.1.

Changelog:

******1.7b753 - 14/12/2020******

64bit edition - P3D v5.0/v5.1

>>>>[NEW]

*AIRCRAFT SYSTEMS*

- Added P3D v5.1 support;

*GRAPHICS*

- Optimizations for supporting v5.1 Ehnanced Atmosphere (PBR and metallic reflections);

*EFFECTS*

- Fx tuning for P3D v5.1HF1;

*MISC*

- Added Pushover support;

- Added Aviaserver EFB and PMS support;

- Added optional param ZFW= in OFP (PAX= and CARGO= must not be present if ZFW= is used). EFB calculates pax number and cargo load to match the entered ZFW;

- Removed green arc from ND in Canadian/PMS configuration;

>>>>[FIXED]

*AIRCRAFT SYSTEMS*

- Improved core code;

- Changed 'direct to' logic to recompute an idle descent profile when a DCT is made above any waypoint constraint;

- Fixed issue that caused engine failure due to wrong estimate of maximum egt for the selected TRP mode and ART status;

- Fixed issue in VNAV which prevented the aircraft starting descent after passing TOD, if both TOC and TOD where in the same leg;

- No battery drain when the EFB is switched OFF;

- Reverse thrust and flight dynamics fine tuning;

- Removed green arc from ND in Canadian/PMS configuration;

*LOAD MANAGER*

- "Refueled aircraft" and "Automatic update aircraft weight and CG" now separated from the "Realistic mode";

- Load Manager now correctly exports all settings;

- Fixed an issue with FS2Crew activation.

*DOCUMENTS*

- Quick Guide updated to include latest changes;

- User Manual updated to include latest changes;

- OM Vol.2 Ch.2 'Normal Procedures' revision;

- List of Documents updated.

*******************

******1.7b753 - 14/12/2020******

64bit edition - P3D v4.4/v4.5

>>>>[NEW]

*MISC*

- Added Pushover support;

- Added Aviaserver EFB and PMS support;

- Added optional param ZFW= in OFP (PAX= and CARGO= must not be present if ZFW= is used). EFB calculates pax number and cargo load to match the entered ZFW;

>>>>[FIXED]

*AIRCRAFT SYSTEMS*

- Improved core code;

- Changed 'direct to' logic to recompute an idle descent profile when a DCT is made above any waypoint constraint;

- Fixed issue that caused engine failure due to wrong estimate of maximum egt for the selected TRP mode and ART status;

- Fixed issue in VNAV which prevented the aircraft starting descent after passing TOD, if both TOC and TOD where in the same leg;

- No battery drain when the EFB is switched OFF;

- Reverse thrust and flight dynamics fine tuning;

- Removed green arc from ND in Canadian/PMS configuration;

*LOAD MANAGER*

- "Refueled aircraft" and "Automatic update aircraft weight and CG" now separated from the "Realistic mode";

- Load Manager now correctly exports all settings;

- fixed an issue with FS2Crew activation;

*DOCUMENTS*

- Quick Guide updated to include latest changes;

- User Manual updated to include latest changes;

- OM Vol.2 Ch.2 'Normal Procedures' revision;

- List of Documents updated.

Alles anzeigen

flythemaddog support forum true glass ctd's

Zitat von Boris

Zitat von Mosquito

Am besten deaktivieren

Wo macht man das?

Insim unter AddOns. Oder Du entfernst/deaktivierst die TrueGlass.dll im Gauges-Folder

Gibt wieder eine neue Beta, mit vielen neuen Features, u.a. CPDLC und Sprachbefehle für v5

https://www.flythemaddog.com/forum/index.ph…44-v45-v50-v51/

Manche Labern nur und andere Entwickler Liefern.

....naja so Unrecht hat er ja nicht. PMDG darf sich gerne ein Beispiel daran nehmen Motzen liegt in der Natur des Menschen, ich befürworte es auch größtenteils. Weil einfach nichts, oder nichts vernünftiges passiert, außer, dass sich die Preise steig nach oben bewegen.

ich überlege, ob ich die Karre tatsächlich noch für den P3D kaufen soll..andererseits wollte ich nicht wirklich noch mehr Geld in den Sim stecken, da ja MSFS abzuwarten bleibt. Daher eine Frage an die Maddogs unter uns: Gibt es von Leonardo schon eine Info, ob und wann überhaupt etwas für MSFS möglich sein wird, falls ja, wird dem Kunden, der bereits im Besitz dieser Produkte ist, ein Rabatt gewährt?

Von Immersive Audio gibt es nunmehr neue Cockpit Sounds für die Maddog

https://secure.simmarket.com/immersive-audi…-p3d4.4-5.phtml

Zitat von DanielH

Von Immersive Audio gibt es nunmehr neue Cockpit Sounds für die Maddog

https://secure.simmarket.com/immersive-audi…-p3d4.4-5.phtml

Kann ich sehr empfehlen.