• Welche Settings sind den optimal für Gaist.

    Es gibt doch im Sim 3 Regler für den Schiff traffic.

    Also meines Wissens gibt es nur 2 Einsteller für den Schiffsverkehr.

    Das sind:

    Leisure boats = 0

    Ships and Ferries = 5

    Ich grüße alle Salzhäute und Teerzöpfe und auch die Pechvögel, die nicht an der Küste wohnen ;)
    Greetings to all the salt skins and tar heads and also the pitch-birds that do not live on the coast ;)

    Viele Grüße Manfred

    SimDocks-Logo-dark-grey200px.png

    Win10 64Bit, i7-8700 3.70GHz, GTX 1070, 16 MB RAM, P3D V5 HF1

  • GAIST V6 kann ab sofort von FS.to oder auch aus dem SimDocks-Forum heruntergeladen werden. Der Upload nach "flyAway Simulation" folgt in Kürze

    Ich grüße alle Salzhäute und Teerzöpfe und auch die Pechvögel, die nicht an der Küste wohnen ;)
    Greetings to all the salt skins and tar heads and also the pitch-birds that do not live on the coast ;)

    Viele Grüße Manfred

    SimDocks-Logo-dark-grey200px.png

    Win10 64Bit, i7-8700 3.70GHz, GTX 1070, 16 MB RAM, P3D V5 HF1

  • GAIST V6 kann ab sofort von FS.to oder auch aus dem SimDocks-Forum heruntergeladen werden. Der Upload nach "flyAway Simulation" folgt in Kürze

    YEAAH. Hammer :)

    Laufen Deine Addons gleich mit oder wird es wie beim letzten Mal eine Update von Dir geben?

    Prozessor: AMD Ryzen 7 7800X3D - ASUS TUF-RTX 4090 - DDR5 6000 32GB - Betriebssystem: Win11 64bit - P3D v5.3 MSFS - Eulenmitglied seit 26.02.2009

  • Die zusätzlichen Routen für die Ostsee, Nordsee, das Mittelmeer usw. sind nicht in der V6 enthalten (hat Henrik wohl vergessen).
    Die müsst Ihr Euch aus der V5 rüberkopieren (oder aus der SimDocks-Filebase neu herunterladen) und dann einmal die layout.json im Ordner "gaist-ship-routes_v1_2" mit der Maus auf die "MSFSLayoutGenerator.exe" ziehen, damit die Routen-Dateien in der Layout.json registriert werden.

    Den Download für die MSFSLayoutGenerator.exe findet Ihr HIER

    MSLayoutGenerator.JPG

    Ich grüße alle Salzhäute und Teerzöpfe und auch die Pechvögel, die nicht an der Küste wohnen ;)
    Greetings to all the salt skins and tar heads and also the pitch-birds that do not live on the coast ;)

    Viele Grüße Manfred

    SimDocks-Logo-dark-grey200px.png

    Win10 64Bit, i7-8700 3.70GHz, GTX 1070, 16 MB RAM, P3D V5 HF1

  • Sehr schön, da hat Henrik wieder ganze arbeit geleistet, ich mag seine Schiffe wirklich sehr. Apropos Nordsee, hat sich an den Routen der Nordsee endlich etwas geändert? Dort fahren die Schiffe nämlich leider mitten durch die riesigen Windparkanlagen, so, als wären sie besoffen. Hab GAIST aus genannten Gründen derzeit deaktiviert. Ganz nebenbei, wird dem Schiffsführer oder der Schiffsführerin eigentlich das Schifffahrtspatent entzogen, wenn er/sie besoffen ist oder bekommt Punkte in Flensburch ^^

    Lieben Gruß

    Christian


    Bahrometrix

    Für eine anspruchsvolle Flugsimulation

    http://www.bahrometrix.de/

    Flugsimulator: MSFS - Board: ASRock B560 Steel Legend - CPU: Intel i7 11700 - RAM 64GB Kingston Fury 3200 - GPU: ASUS RTX 4080 16GB TUF - Speicher: Samsung 970 EVO Plus 1TB GB & 980 EVO 1TB

  • An den Routen wurde nichts geändert.

    Ich grüße alle Salzhäute und Teerzöpfe und auch die Pechvögel, die nicht an der Küste wohnen ;)
    Greetings to all the salt skins and tar heads and also the pitch-birds that do not live on the coast ;)

    Viele Grüße Manfred

    SimDocks-Logo-dark-grey200px.png

    Win10 64Bit, i7-8700 3.70GHz, GTX 1070, 16 MB RAM, P3D V5 HF1

  • Das ist Pech :(

    Lieben Gruß

    Christian


    Bahrometrix

    Für eine anspruchsvolle Flugsimulation

    http://www.bahrometrix.de/

    Flugsimulator: MSFS - Board: ASRock B560 Steel Legend - CPU: Intel i7 11700 - RAM 64GB Kingston Fury 3200 - GPU: ASUS RTX 4080 16GB TUF - Speicher: Samsung 970 EVO Plus 1TB GB & 980 EVO 1TB