Interessanter Weise habe ich das auf meinem langen Asienumlauf letzte Woche nicht ein Mal beobachten können. Anders herum durchaus, Wolken durchfliegen wo im Radar nichts ist. Aber das ist ja völlig in Ordnung...
[FSX/P3D] Active Sky Next (ASN)
-
- FSX/P3D
- HiFi Sim
-
Maik -
15. September 2013 um 23:47
-
-
Ich weiss was Du meinst, Maik. Mir ist es in der Kombination ASN + REX Essential nur noch nicht passiert. Gerade auf der langen Tour habe ich, bedingt durch sehr verschiedene Wetterzonen, bewusst darauf geachtet.
-
-
das ist verlockend, gibt es ne geld zurück garantie bei rückgabe?
-
- Offizieller Beitrag
Ich glaub das hat nur Flight1 Rafi. Ist bei nem Download-Produkt ja nie so einfach...
-
Ja habe es auch gerade gesehen. Doch es ist heut zu Tage auch mit Downloadprodukten möglich. Aber bei PC Aviator gibt es keinen Refund für Downloads. Ich schaue mal bei HiFi Sim selbst. Hab mir erst vor kurzem FSGRW zugelegt aber von vielen gehört ASN soll das nonplusultra sein.
-
- Offizieller Beitrag
Bei ASN hast du eine einwöchige Trial
-
Hallo zusammen
Kann ich das ASN Wetter Radar auch auf dem 2 Rechner ausführen?
Ich weiss das ASN selbst im Netztwerk geht aber vom Radar weiss ich es leider nicht.
Gruss Dani
-
Update SP3 ist draußen.
Zitat von ActiveSkyAlles anzeigenActive Sky Next Service Pack 3 has been officially released for both FSX and Prepar3D versions. This update provides numerous improvements and fixes, and is recommended for all ASN users.
Please download the update from our downloads page to update now! Thanks go out to everyone who participated in the SP3 OPEN BETA process!
Want to try ASN SP3? Even if you’ve tried ASN before, all trial licenses have been reset for SP3, and you can try it again FULL-FEATURED, FREE for 7 days!
Changelog:Service Pack 3:
——————-
– Compatibility adjustments for FSX:SE and P3D
– Fixed problem where “No ASConnect Log” error messages could show up repeatedly without ability to press OK and continue normal operation
– Added new handling to identify invalid appdata path selection, and notify user during initialization to select the proper path
– Added additional handling in as_btstrp_config_manager to further prevent blocking
– Fixed issue in Tools->Export logs where btstrp.txt might not be included
– Added new “Warnings Option”: Notify when new version available (default on) – disable this to stop notifying you when a new version has been made available
– Fixed an interpolation issue when certain source stations are very close to the interpolated station (i.e. LOAN->LOAV)
– Fixed warnings options failure to save/load and be properly persistent between sessions
– Removed unneeded restart required/resynth message when changing warnings options
– Modified ambient handling to not affect AI aircraft for certain parameters including temperature, so that AI contrails (and AI general) will behave normally without user aircraft’s ambient influence
– Added METAR station KFIL
– Added 3 new servers (2 European, 1 USA) for increased network capacity and performance
– Fixed a rare issue where some clients could not download from any server, resulting in failure of ASN to load completely
– Fixed problem with XGauge when used with FSX-Boxed sim version, where it may result in failure of XGauge to communicate with ASN Client, with no apparent “Power” or any imagery provided
– Fixed issue where user-edited aloft wind data changes would not be loaded back properly in subsequent wx-file load process
– Fixed problem where other AI aircraft would not be displayed if Wake Turbulence slider was set to “off” (or zero) -
SP4 Beta
Zitat von ASNAlles anzeigenHello everyone!
We're pleased to announce that a new service pack for ASN for FSX and ASN for P3D is now available in OPEN BETA format. This is a BETA version, not yet extensively tested, and may have issues. Please use at your own risk.
ASN for P3D Service Pack 4:
- Adjusted documentation regarding ambients error and SimConnect and networked configurations
- Disabled Visual Fix: Cloud Pop Fix feature from P3D version as it is no longer supported or needed in P3D v3, and could potentially cause issues with P3Dv2.5
- Adjusted invalid simconnect version message warning from ASConnect to specify that the simconnect.msi file is located in REDIST or SDK folders (it depends on which Simulator type/version)
- Adjusted "Ambients error" message to be more accurate, descriptive and refer to a special URL (http://www.hifisimtech.com/ambients-error) which goes directly to our knowledgebase article
- Adjusted ASConnect default install path search order to P3D v3 vs V2
- Miscellenous installer fixes and adjustments related to P3Dv3
- Added detection of new P3Dv3 install + P3Dv2 paths set in ASN = Notification message that paths should be checked/set to the intended P3D version
- Added new v3 variant of xgauge.dll for new path/registry locations
- Added new ASN client handling to support installation of proper xgauge.dll variant
NOTE: P3Dv3 users should uninstall/reinstall XGauge via the XGauge Installation Wizard (TOOLS menu) to ensure that gauge files are properly updated
- Added compatibility with P3D 3.0.10.14945
* Important Notes:
* You will need to set your paths appropriately in ASN for P3D (simulator installation and simulator appdata path) and restart ASN.
* It is recommended to run P3Dv3 "As administrator" or you may experience logging/ambient errors.
* P3D v3 base install no longer includes legacy simconnect interface. You will need to install the simconnect client from here: [P3Dv3 folder]\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi
* ASNext utilizes traditional FSX/P3Dv1/P3Dv2 add-on configuration and file/folder locations - P3Dv3 recommends that add-ons use a brand new system with add-on content and files located outside of the P3Dv3 installation location in order to avoid potential issues during updates.
* Until such time that Active Sky is redesigned for specific P3Dv3 recommended locations, we recommend uninstalling ASN before applying P3Dv3 updates, in order to avoid any potential update issues.ASN for FSX Service Pack 4:
- Fixed issue with radar API leading to excessive intensity levels in lighter rain for areas close to the aircraft
- Adjusted invalid simconnect version message warning from ASConnect to specify that the simconnect.msi file is located in REDIST or SDK folders (it depends on which Simulator type/version)
- Adjusted "Ambients error" message to be more accurate, descriptive and refer to a special URL (http://www.hifisimtech.com/ambients-error) which goes directly to our knowledgebase article
- Adjusted documentation regarding ambients error and SimConnect and networked configurationsThe updates can be downloaded from our downloads page.
Please post bug reports/issues in a new thread
-
- Offizieller Beitrag
Sehr gut, wegen dem Wolken-Aufpoppen wollte ich mal nen Thread aufmachen.
-
- Offizieller Beitrag
Raus aus der Beta, rein in den Release:
http://www.hifisimtech.com/active-sky-nex…ack-4-released/
ASN for P3D Service Pack 4:
Alles anzeigen– Fixed issue with date handling when loading saved weather file
– Fixed issue related to BR, FG plus RA or SN in a METAR resulting in no precipitation
– Icing depiction adjustments for more consistent and expected results both in and below clouds (i.e. freezing rain)
– Fixed an issue regarding surface temperature interpolation
– Additional RVR/Runway Conditions handling adjustment
– Fixed issue regarding 9999+ meters decoding when vis close to threshold (5.6SM)
– Adjusted documentation regarding ambients error and SimConnect and networked configurations
– Fixed issue with METAR visibility parsing related to RVR and “Runway Conditions” elements being mis-identified, resulting in improper visibility
– Disabled Visual Fix: Cloud Pop Fix feature from P3D version as it is no longer supported or needed in P3D v3, and could potentially cause issues with P3Dv2.5
– Adjusted invalid simconnect version message warning from ASConnect to specify that the simconnect.msi file is located in REDIST or SDK folders (it depends on which Simulator type/version)
– Adjusted “Ambients error” message to be more accurate, descriptive and refer to a special URL (https://www.forum.eulenandfriends.de/www.hifisimtech.com/ambients-error) which goes directly to our knowledgebase article
– Adjusted ASConnect default install path search order to P3D v3 vs V2
– Miscellenous installer fixes and adjustments related to P3Dv3
– Added detection of new P3Dv3 install + P3Dv2 paths set in ASN = Notification message that paths should be checked/set to the intended P3D version
– Added new v3 variant of xgauge.dll for new path/registry locations
– Added new ASN client handling to support installation of proper xgauge.dll variant
NOTE: P3Dv3 users should uninstall/reinstall XGauge via the XGauge Installation Wizard (TOOLS menu) to ensure that gauge files are properly updated
– Added compatibility with P3D 3.1.2.15841
* Important Notes:
* You will need to set your paths appropriately in ASN for P3D (simulator installation and simulator appdata path) and restart ASN.
* It is recommended to run P3Dv3 “As administrator” or you may experience logging/ambient errors.
* P3D v3 base install no longer includes legacy simconnect interface. You will need to install the simconnect client from here: [P3Dv3 folder]\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi
* ASNext utilizes traditional FSX/P3Dv1/P3Dv2 add-on configuration and file/folder locations – P3Dv3 recommends that add-ons use a brand new system with add-on content and files located outside of the P3Dv3 installation location in order to avoid potential issues during updates.
* Until such time that Active Sky is redesigned for specific P3Dv3 recommended locations, we recommend uninstalling ASN before applying P3Dv3 updates, in order to avoid any potential update issues. -
- Offizieller Beitrag
Version 4.1 ist draußen.
http://www.hifisimtech.com/Downloads/
Alles anzeigenASN for P3D Service Pack 4.1:
– Fixed issue with certain conditions causing severe icing when not intended
– Fixed issue relating to FZFG or FZBR (freezing fog or mist) incorrectly causing freezing rain depiction and associated icing
– Reduced icing rates in snow precipitation conditions
ASN for P3D Service Pack 4:
- Fixed issue with date handling when loading saved weather file
- Fixed issue related to BR, FG plus RA or SN in a METAR resulting in no precipitation
- Icing depiction adjustments for more consistent and expected results both in and below clouds (i.e. freezing rain)
- Fixed an issue regarding surface temperature interpolation
- Additional RVR/Runway Conditions handling adjustment
- Fixed issue regarding 9999+ meters decoding when vis close to threshold (5.6SM)
- Adjusted documentation regarding ambients error and SimConnect and networked configurations
- Fixed issue with METAR visibility parsing related to RVR and "Runway Conditions" elements being mis-identified, resulting in improper visibility
- Disabled Visual Fix: Cloud Pop Fix feature from P3D version as it is no longer supported or needed in P3D v3, and could potentially cause issues with P3Dv2.5
- Adjusted invalid simconnect version message warning from ASConnect to specify that the simconnect.msi file is located in REDIST or SDK folders (it depends on which Simulator type/version)
- Adjusted "Ambients error" message to be more accurate, descriptive and refer to a special URL (http://www.hifisimtech.com/ambients-error) which goes directly to our knowledgebase article
- Adjusted ASConnect default install path search order to P3D v3 vs V2
- Miscellenous installer fixes and adjustments related to P3Dv3
- Added detection of new P3Dv3 install + P3Dv2 paths set in ASN = Notification message that paths should be checked/set to the intended P3D version
- Added new v3 variant of xgauge.dll for new path/registry locations
- Added new ASN client handling to support installation of proper xgauge.dll variant
NOTE: P3Dv3 users should uninstall/reinstall XGauge via the XGauge Installation Wizard (TOOLS menu) to ensure that gauge files are properly updated
- Added compatibility with P3D 3.1.2.15841* Important Notes:
* You will need to set your paths appropriately in ASN for P3D (simulator installation and simulator appdata path) and restart ASN.
* It is recommended to run P3Dv3 "As administrator" or you may experience logging/ambient errors.
* P3D v3 base install no longer includes legacy simconnect interface. You will need to install the simconnect client from here: [P3Dv3 folder]\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi
* ASNext utilizes traditional FSX/P3Dv1/P3Dv2 add-on configuration and file/folder locations - P3Dv3 recommends that add-ons use a brand new system with add-on content and files located outside of the P3Dv3 installation location in order to avoid potential issues during updates.
* Until such time that Active Sky is redesigned for specific P3Dv3 recommended locations, we recommend uninstalling ASN before applying P3Dv3 updates, in order to avoid any potential update issues.ASN for FSX Service Pack 4.1:
– Fixed issue with certain conditions causing severe icing when not intended
– Fixed issue relating to FZFG or FZBR (freezing fog or mist) incorrectly causing freezing rain depiction and associated icing
– Reduced icing rates in snow precipitation conditions
ASN for FSX Service Pack 4:
- Fixed issue with date handling when loading saved weather file
- Fixed issue related to BR, FG plus RA or SN in a METAR resulting in no precipitation
- Icing depiction adjustments for more consistent and expected results both in and below clouds (i.e. freezing rain)
- Fixed an issue regarding surface temperature interpolation
- Additional RVR/Runway Conditions handling adjustment
- Fixed issue regarding 9999+ meters decoding when vis close to threshold (5.6SM)
- Fixed issue with radar API leading to excessive intensity levels in lighter rain for areas close to the aircraft
- Adjusted invalid simconnect version message warning from ASConnect to specify that the simconnect.msi file is located in REDIST or SDK folders (it depends on which Simulator type/version)
- Adjusted "Ambients error" message to be more accurate, descriptive and refer to a special URL (http://www.hifisimtech.com/ambients-error) which goes directly to our knowledgebase article
- Adjusted documentation regarding ambients error and SimConnect and networked configurations
- Fixed issue with METAR visibility parsing related to RVR and "Runway Conditions" elements being mis-identified, resulting in improper visibility -
ASN open Beta für P3D 3.2 verfügbar:
-
Endlich. Sehr geil.
-
Zitat von ASN
ASN for P3D SP4.1 with P3D v3.2 compatibility update is now official. Thanks to those who participated during our open beta test!
Please visit our download page to download B5913 (if you have not already done so) to establish ASN compatibility with P3D v3.2.
-
ich habe nach der Installation ( erst Update, danach nochmal Vollversion) probleme mit ASconnect, welches sich nicht verbinden kann
-
- Offizieller Beitrag
Oh je, das hatte ich auch mal. Und das hat echt gedauert, es wieder hinzubekommen.
Mein Workflow damals:Active Sky deinstallieren. Rechner neu starten. P3D starten und wieder beenden. Rechner neu starten. Active Sky installieren. P3D starten und beenden. fertig.